The Ghost Pro III Complete Package

Out of stock

SKU: 11-1 Categories: , , Tags: , , , , ,


Take your filming to the next level with The Ghost Pro III Encoder Version. Ghost Pro III is designed for the most demanding cinema packages. We created a system ready to work with large pro camera systems up to 12lbs. This Pro version will easily support your RED or similar cinema camera, as well as smaller DSLR’s. This model has powerful motors with built-in encoders for the best performance of any motor on the market. You can attach a follow focus, matte box, and any extras without worrying if the gimbal can support the extra weight. The Ghost Pro III incorporates easy adjusting knobs and quick release levers, so balancing can be done on the fly in just minutes. No tools are necessary. The Ghost Pro II has 5 pre-programmed modes allowing a very versatile operation. The gimbal can also be disassembled for easy transport.


  1. The Ghost Pro III
  2. 2x Batteries
  3. Charger (input 110-240V)
  4. Stand
  5. Extension Grip
  6. Accessory Mount
  7. Thumb Control
  8. Follow Focus Rails
  9. Shipping Case


  • Supports cameras 1 – 12 pounds
  • 3 powerful PMS motors (Permanent Magnet Synchronous Motor). Each motor has  3.2kgs of torque with built-in encoders so they run smoother than any other motors on the market.
  • Durable CNC’d aluminum and carbon fiber construction
  • Mode Switch with 5 programmable modes
  • 32-bit control board powered by Basecam
  • Built-in Electronics with quick-connect cords for the motors
  • Dual sensors providing more stable and accurate stabilization.
  • Auto-Tune available through the software
  • Robust roll bar
  • Easy-adjust knobs and quick release levers (for balancing)
  • Quick-release camera adjustment – You can also mount your own quick release plate if desired
  • 2 hours of battery life
  • Easy charge lithium-ion battery
  • On/OFF switch
  • Customer Support via phone/email
  • Upgradable – easily add a joystick, remote control, or customized settings.
  1. Mode 1: Follow Mode The Camera slowly tracks your movements.
  2. Mode 2: Lock Mode – The operator can move any direction and the camera stays locked in one position.
  3. Mode 3: Joystick Mode – Manually operate the pan and tilt with a joystick (sold separately).
  4. Mode 4: Calibrate Gyro – The Ghost calibrates the gyro at start-up, but you can use this mode for calibration.
  5. Mode 5: Calibrate ACC – This is a built-in “fail-safe” to calibrate your sensor.
  6. An inverted mode can be achieved by flipping the gimbal upside-down in follow mode or you can restart in an inverted mode.

Modes can also be customized in the software. Other example modes: inverted mode, turn motors off/on, set tilt angles by hand, faster follow mode

 ** Estimated ship time is 2-3 days

Although the Ghost is tested with a camera before shipping, it does not come pre-tuned or balanced for your specific camera setup. Customers will be responsible for tuning and balancing their cameras. We can provide example profiles upon request.

Supported camera weight with accessories1 – 12 pounds (0.5 – 5.5kg)
Accepted Camera Dimensions195mm(W) x 280mm(L) x 225mm (H)
Gimbal Size620mm(W) x 280-380mm (D) x 500mm(H)
 Gimbal Weight3.465kg

Frequently Asked Questions (FAQ)

Why buy the Ghost?
Aside from our competitive price, we strive to make one of the best quality gimbals that are easy to balance and operate. We were one of the first companies to develop a brushless gimbal, so we know this technology inside and out and our customer service can assist in any questions you might have.

Why Choose the Pro II vs the V2?

The main difference is how heavy a camera setup you want to mount. If your camera is between 1-12lbs, the Pro version is for you. If your camera is 5lbs or under you will want the V2. The V2 is much lighter, so it will be less fatigue on your arms.

How heavy of a camera can be supported?

Camera, lens, and accessory combinations from 1 – 12 pounds. Anything added above the grip bar is not factored into this weight limit. i.e. monitor

How long does the battery last?

The supplied battery will last from 90 to 150 minutes. Battery life depends on how heavy of a camera you are flying and what your power is set to in the GUI.

Can I attach a monitor?

Yes, you will want to purchase the accessory mount and then you can attach any accessory to the top of the grip bar.

Can I control the Ghost with a joystick or remote control?

The Ghost is easily adapted to be controlled by a joystick or remote control. Both are sold separately, but we have instructional videos on how to set those up.

0/5 (0 Reviews)

Additional information

Weight23 oz